Rajendra Tubes India
Mumbai, Maharashtra
GST No. 27AAAFR2907H1ZD
TrustSEAL Verified
Call 08046039776 95% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material | Stainless Steel |
| Material Standard | ASTM A182 |
| Type | Blind Flange |
| Usage/Application | INDUSTRIAL |
The Stainless Steel Blind Flange helps in terminating the end of a piping system. The SS Blind Flanges consist of holes around its perimeter, and the gasket which seals the rings is machined into the mating surface. We manufacture ASTM A182 F304 Blind Flange, which comes in many shapes and dimensions according to the client’s particular requirements. The ASME B16.5 Blind Flange follows the industrial standard of quality and safety, and these are available in size NPS ½” to NPS 24. It is frequently produced from forged, cast, or plate material.The ANSI B16.5 Blind (BLRF) Flange we manufacture is well suited for environments with high-temperature pressure. We also specialize in EN 1092-1 Type 05 Blind Flange production, which is widely used in various industries, including gas, oil, petrochemical, etc. One of the best properties of these blind flanges is that they can be assembled and disassembled quite easily. We are one of the top manufacturers and stockists of Stainless Steel 316 Blind Flange, which has austenitic stainless steel along with chromium, nickel, and molybdenum. We also have a huge ASTM A182 SS BLRF Flange stock- these are all made of high-quality raw material using the latest machinery to give our clients the best-finished products.
Product Details:
| Minimum Order Quantity | 100 Piece |
| Usage/Application | Industrial |
| Type | Flange |
| Shape | Round |
| Color | SILVER - CONTACT - +91 7021789138 / +91 9920308221 |
| Material | Stainless Steel |
Stainless steel flanges come in different types, each designed for specific applications and uses. Here are some of the most common types of stainless steel flanges and their uses:
Stainless Steel Weld Neck Flanges: SS Weld neck flanges are designed to be butt-welded to pipes and provide a high strength, leak-proof connection. They are commonly used in high-pressure applications, such as oil and gas pipelines, and are preferred where frequent dismantling is not required.
Stainless Steel Slip-On Flanges: SS Slip-on flanges are designed to slip over the end of a pipe and are then welded in place. They are easy to install and are often used in low-pressure applications, such as water and gas pipelines.
Stainless Steel Blind Flanges: SS Blind flanges are designed to be used to close off the end of a pipe or valve. They are commonly used in piping systems that need to be isolated or where maintenance is required.
Stainless Steel Socket Weld Flanges: SS Socket weld flanges are designed to be socket-welded to the end of a pipe. They provide a strong, leak-proof connection and are commonly used in high-pressure applications, such as chemical and petrochemical industries.
Stainless Steel Threaded Flanges: SS Threaded flanges are designed to be screwed onto the end of a pipe. They are commonly used in low-pressure applications, such as water and gas pipelines, and are easy to install and dismantle.
Stainless Steel Lap Joint Flanges: SS Lap joint flanges are designed to be used with a lap joint stub end, which is inserted into the flange. They are commonly used in systems where frequent dismantling is required, such as in the food and beverage industry.
Stainless Steel Orifice Flanges: SS Orifice flanges are designed to be used in systems that require measurement of flow rate. They have a small hole in the center, which can be used to insert an orifice plate, providing an accurate measurement of the flow rate.
Stainless Steel Spectacle Blind Flanges: SS Spectacle blind flanges are designed to be used in systems where isolation or flow diversion is required. They consist of two metal discs, one with a hole and the other without, and can be rotated to allow or block the flow of fluid.
Additional Information:
Product Details:
| Usage/Application | Industrial |
| Type | FLANGES |
| Shape | Round |
| Color | Silver - CONTACT - +91 7021789138 / +91 9920308221 |
| Surface Finish | Polished |
SMO 254 Flanges are one of the most demanded products from our inventory. In Piping Solutions, we are contributing by providing useful products. SMO 254 is an Austenitic Stainless-Steel material, which offers numerous beneficial qualities. We use the highest quality material to manufacture Flanges. We are offering SMO 254 Flanges in various sizes, dimensions, elements, and specifications. We are providing a qualitative range of Stainless Steel 254 SMO Flanges. Under national and international standards and industrial norms, we manufacture perfectly matching Flanges. This SMO 254 contains nitrogen and Molybdenum, which offers high performance in every application. With custom made specifications, we are also providing suitable Flanges to our clients. These SMO 254 Flanges are ideal for marine applications. Excellent properties of these Flanges make it able to perform well in chemical containing environments. These Flanges have a superior quality of resistance. Additional Molybdenum offers excellent resistance to crevice and pitting corrosion cracking. We are offering SMO 254 Flanges, which has exceptional strength compared to other versions of stainless steel. We are using the most excellent quality of Austenitic Stainless-Steel for manufacturing these Flanges. This enhances features like durability, toughness, high tensile strength, and superior performance. Our high-grade SMO 254 Flanges has good fabricability, machinability, formability, and weldability. Seamac Piping Solutions Inc. is producing these Flanges in bulk amount without compromising in quality. By using the latest technology, modern machinery, and defined processes to fabricate Flanges, we can deliver perfectly suitable products to our esteem clients. As a customer-focused manufacturing firm, we are always offering excellence with all products.
Product Details:
| Minimum Order Quantity | 250 Piece |
| Material | Stainless Steel - CONTACT - +91 7021789138 / +91 9920308221 |
| Size | 1/2" NB X 48" NB |
| Flange Face Type | Weld Neck |
| Material Standard | ANSI B16.5 |
| Type | Weld neck flanges |
| Usage/Application | Industrial |
| Product Type | Long Weld Neck |
| Grade | 304 |
| Shape | Round |
The flanges of these tubes are connected to the neck of the flange by welding the shaft. Instead, this step helps to move tension from the flange to the tubing. The concentration of stress from the hub foundation is also significantly reduced. Weld neck flanges are also used for high-pressure applications. The internal diameter of the flange is needed for the inside diameter of the pipe. Welded neck pipes of a hub are protected by published requirements from 1/2 "to 96" sizes.
The Stainless Steel Weld neck Flange maker typically has three faces with the Weld Neck Flange Jis 5k. It is-a flat face, an uplifting face, or RTJ. For Weld Neck Flange Jis 16k, when the average height is 1/16 of an inch for a weld neck pipe flanges below 400 #, a Weld Neck Flange Raised Face is required. The standard Weld Neck Flange A105 needs a raised face height of 1/4 "for weld neck tubes of 400 # and above.
The Weld Neck Flange Asme B16.5 Class 300 Specification standard includes all Steel Pipe flanges, including Flanged Fittings from NPS 1/2 up to NPS 24 metric/inch and is included in a pressure range from class 150. These Weld Neck flange Din en 1092-1, the pressure ratings, tolerance levels, labeling, and checking, as per Weld Neck Flange Jis 10k. The-weld neck flanges and blind flanges are two very significant flanges that are commonly used in piping systems. The standard for specification ASME B16 5 (ANSI B16 5) only covers flanges up to just 24 inches. Five or B16 5 interchangeability (both are referenced to the same standard).
Additional Information:
Product Details:
| Minimum Order Quantity | 200 Piece |
| Material Standard | ANSI B16.5 |
| Usage/Application | Industrial |
| Type | Flange |
| Shape | Round - CONTACT - +91 7021789138 / +91 9920308221 |
| Material | Stainless Steel |
There are many multiple kinds of stainless steel flanges. Each form meets its own requirements. Long showed that having flanges are connected to the pipe’s neck.
The way the above flange has been fastened ensures that depth is much like the aspects of the pipe to which it is attached. Such forged steel flanges supplier are typically used in elevated application areas.
Certain aspects of shop fabrication will be eliminated by an FCI-forged link. A reinforced foam implementation eradicates the need for shed tears hole cutting, digging, floor plan, trying to form, and trying to tap.
The manufacturing of a nozzle neck eradicates a need to inspect tray necks, cut as well as bevel this same pipe, weld, form, as well as layout.
This same element manufacturing no longer requires welding and fitting the spacer to a pipe or forging a conical neck. This same Reinforced foam setup does not necessitate welding the bits to the ship’s shell or the nozzle’s chest.
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material Standard | ANSI B16.5 |
| Usage/Application | Industrial |
| Type | ROUND |
| Shape | Round |
| Surface Finish | Smooth |
| Surface Finishing | Polished |
| Material | Stainless Steel - CONTACT - +91 7021789138 / +91 9920308221 |
| No Of Holes | 4 Holes |
Stainless steel flanges come in different types, each designed for specific applications and uses. Here are some of the most common types of stainless steel flanges and their uses:
Stainless Steel Weld Neck Flanges: SS Weld neck flanges are designed to be butt-welded to pipes and provide a high strength, leak-proof connection. They are commonly used in high-pressure applications, such as oil and gas pipelines, and are preferred where frequent dismantling is not required.
Stainless Steel Slip-On Flanges: SS Slip-on flanges are designed to slip over the end of a pipe and are then welded in place. They are easy to install and are often used in low-pressure applications, such as water and gas pipelines.
Stainless Steel Blind Flanges: SS Blind flanges are designed to be used to close off the end of a pipe or valve. They are commonly used in piping systems that need to be isolated or where maintenance is required.
Stainless Steel Socket Weld Flanges: SS Socket weld flanges are designed to be socket-welded to the end of a pipe. They provide a strong, leak-proof connection and are commonly used in high-pressure applications, such as chemical and petrochemical industries.
Stainless Steel Threaded Flanges: SS Threaded flanges are designed to be screwed onto the end of a pipe. They are commonly used in low-pressure applications, such as water and gas pipelines, and are easy to install and dismantle.
Stainless Steel Lap Joint Flanges: SS Lap joint flanges are designed to be used with a lap joint stub end, which is inserted into the flange. They are commonly used in systems where frequent dismantling is required, such as in the food and beverage industry.
Stainless Steel Orifice Flanges: SS Orifice flanges are designed to be used in systems that require measurement of flow rate. They have a small hole in the center, which can be used to insert an orifice plate, providing an accurate measurement of the flow rate.
Stainless Steel Spectacle Blind Flanges: SS Spectacle blind flanges are designed to be used in systems where isolation or flow diversion is required. They consist of two metal discs, one with a hole and the other without, and can be rotated to allow or block the flow of fluid.
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Usage/Application | Industrial |
| Type | Blind Flange |
| Shape | Round - CONTACT - +91 7021789138 / +91 9920308221 |
| Material | Stainless Steel |
| Surface Finishing | Polished |
Safety: Flanges used for spectacles are the safest option. They are advantageous in making a water-tight seal between two pipes and retaining a controlled pressure level, minimizing environmental pollution.
Moreover, these flanges offer an additional safety layer through their visibility, thus allowing experts to determine the placement of pipes and attachments.
Durability: Spectacle blind flanges crafted from hard-wearing materials like stainless steel or other metals offer long-lasting protection from corrosion and rust compared to other pipe fitting types, allowing them to maintain their secure fit of pipes for an extended period.
Versatile: Spectacle blind flanges have become a go-to choice for many industries due to their flexible construction.
These flanges are suitable in different environments, such as extreme heat, cold temperatures, and hazardous locations.
Additionally, Spectacle Flanges make it possible to connect pipes of different sizes while ensuring a reliable liquid seal and a mechanical connection.
Cost-effective: Spectacle Blind Flanges are an economically sensible choice – not only for their cost efficiency when purchasing and installing but for their ability to reduce the likelihood of expensive repair costs due to external issues like erosion or deterioration.
In addition to providing an immediate remedy, this flange allows businesses to save funds over time by avoiding repair expenses caused by external conditions.
Ease of Use: Installation is straightforward; align your pipes and slot in the spectacle blind flange. Depending on your plumbing system, this may take up to a few hours.
No extra gear is required, only the correct tools (e.g., wrenches) and a fundamental understanding of these components.
Time-Saving Benefits: Installation of this product type is not too difficult, meaning you won’t have to spend days setting it up. It will likely take between 15 minutes to several hours, depending on the piping arrangement and your expertise/know-how.
Therefore, it can save you time in the long run. If you are unsure, however, it is best to gain assistance from someone with experience in the field.
Improved Performance: The superior sealing capabilities of spectacle blind flanges increase system performance and make for leak-free operations, resulting in cost savings compared to traditional pipe fittings.
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Flange Face Type | Weld Neck |
| Type | Weld neck flanges |
| Usage/Application | Industrial |
| Material Standard | ANSI B16.5 |
| Product Type | Long Weld Neck |
| Shape | Round - CONTACT - +91 7021789138 / +91 9920308221 |
| Grade | SS316 |
| Material | Stainless Steel |
The 316 Stainless Steel Weld Neck Flanges is attached to the pipe end. It is the part that connects the pipe to the pipe. There are holes on the flange, and bolts can be worn to make the two flanges tightly connected, and the flange is sealed with a liner. Flanged pipe fittings are pipe fittings with flanges (flanges or joints). It can be cast, threaded or welded. The flange connection is composed of a pair of flanges, a gasket and a number of bolts and nuts. The gasket is placed between the sealing surface of the two flanges. After tightening the nut, the specific pressure on the surface of the gasket will be deformed after reaching a certain value, and the uneven part of the sealing surface will be filled to make the connection tight without leakage. A flange connection is a detachable connection. According to the connected parts can be divided into container flange and pipe flange. According to the structure type, there are integral flange, looper flange and threaded flange. Common integral flanges are flat welding flange and butt welding flange. 316 Stainless Steel Weld Neck Flanges: suitable for connection of steel pipe with nominal pressure not exceeding 2.5MPa. The sealing surface of flat welded flange can be made into smooth, concave and convex and tenon type three. The application of smooth flat welding flange is large. It is mainly used in the case of moderate medium conditions, such as low pressure unpurified compressed air and low pressure circulating water. Its advantage is that the price is cheaper.
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Piece |
| Material Standard | ANSI B16.5 |
| Usage/Application | Industrial |
| Rated Pressure | 150 PSI |
| Shape | Round - CONTACT - +91 7021789138 / +91 9920308221 |
| Surface Finish | Polished |
| Packaging Type | Box Packaging |
| Material | Stainless Steel |
Stainless Steel Flanges are available in different grades, each with unique qualities and benefits. The overwhelmingly most common are 304 and 316 as defined by ASTM.
Popular flange options in the industry include Slip On, Weld Neck, Blind, Long Weld Neck, Threaded, and Orifice Flanges. Flanges are an essential part of industrial equipment used to connect pipes, valves, and other machinery.
They offer ease of cleaning, maintenance, and inspection, In high-load industries where temperature and pressure is a concern, selecting the right flange is crucial, as it can be a weak point in the structure.
Various methods can be used to connect Stainless Steel Flanges to piping systems depending on the application, pressure, and temperature requirements.
Typically they are similar to commodity carbon steel connections, but some special weld procedures are often necessary. When browsing the market for stainless steel flange fittings, it is important to understand the types available and their unique characteristics.
Orifice flanges made of stainless steel are flanges created to be used in systems that need specific flow measurement or regulation. Different variations of orifice flanges come in diverse types and sizes.
It is necessary to select the appropriate type considering the fluid being transported, the necessary flow rate, system pressure, and temperature.
Additional Information:
Product Details:
| Usage/Application | Industrial |
| Shape | Round - CONTACT - +91 7021789138 / +91 9920308221 |
| Surface Finish | Polished |
| Surface Finishing | Polished |
| Material | Stainless Steel |
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Usage/Application | Industrial |
| Type | FLANGE |
| Shape | CIRCLE |
| Color | SILVER |
| Surface Finish | Polished |
Resistance to corrosion – In pipework systems, corrosion is a big consideration, which makes stainless steel flanges a great choice as they are incredibly strong, durable and capable of withstanding immense pressures.
Temperature resistance – Flanges may also need to withstand high temperatures in some environments, so it is essential that the correct grade of stainless steel flanges are selected to ensure that there is no deformation or warping.
Easy Fabrication – Most grades of stainless steel can be cut, machined, formed and fabricated with relative ease which means that your order can be filled quicker, letting you start your project promptly.
Aesthetic Qualities – Stainless steel is easy to maintain and comes in a variety of finishes. Painting and blasting are not necessary, which can save on costs.
Assembly – The use of flanges means that piping spools can be assembled without welding and numerous piping spools can be manufactured at a faster rate.
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material | Stainless Steel |
| Size | 1/2" |
| Flange Face Type | Weld Neck |
| Usage/Application | Industrial |
| Application | Chemical Fertilizer Pipe, Structure Pipe, Gas Pipe, Hydraulic PIpe, Pneumatic Connections |
| Shape | Round |
| Surface Finishing | Polished |
| Head Code | STAINLESS STEEL SOCKET WELD FLANGES - CONTACT - +91 7021789138 / +91 9920308221 |
Socket Weld Flanges are a type of pipe flange that attaches to the pipe by inserting it into a recessed flange area and welding it in place. They offer an alternative to slip-on, threaded, or lap joint flanges for low-pressure applications. A Socket Weld requires precisely machined ends that match the stated dimensions for proper fitment. Socket weld flanges have a unique design that allows them to handle high-pressure situations effectively. The flange comprises a round plate with bolt holes and a raised neck with a socket or cavity fitting the pipe. The socket provides sufficient welding space and helps create a strong, leak-proof joint. One of the significant benefits of socket weld flanges is that they offer excellent flow rates due to their smooth bore transition from the pipe into the flange. They can also handle high-pressure situations, making them an ideal choice for various applications. Socket weld flanges are commonly used in high-pressure piping systems such as chemical processing, petrochemical refining, oil and gas, and power generation systems. These flanges efficiently connect pipes to valves, fittings, and equipment while offering high reliability and safety. In some instances, socket weld flanges are used in small-bore piping systems such as steam, air, water, and gas pipelines where high pressure and temperatures exist. One of the benefits of using socket weld flanges is that they provide a permanent and robust seal. They can easily fit into tight spaces where flange welding is challenging. The socket weld flange is also structurally sound because its design can withstand extreme vibration, pressure, and temperature fluctuations. They are also easier to machine than other flanges and provide cost-effective solutions in high-pressure piping systems.
Additional Information:
Hastelloy C276 Pipe offers exceptional resistance to corrosion and oxidation in harsh chemical and industrial environments, making it ideal for use in chemical processing, pollution control, and marine applications.
Additional Information:
Duplex Steel S32205 Wire delivers high strength, corrosion resistance, and excellent weldability. Suitable for marine, chemical, and construction industries, it performs reliably in harsh environments and demanding structural or fabrication applications.
Additional Information:
Inconel 600 Sockolet is a high-strength, corrosion-resistant pipe fitting designed to connect branch pipes to main lines, ideal for high-temperature and harsh chemical environments in industrial applications.
Additional Information:
Inconel 625 Sockolet is a high-performance, corrosion and heat-resistant pipe fitting used to connect branch pipes to main lines in extreme environments like marine, chemical processing, and aerospace applications.
Additional Information:
Hastelloy C276 Pipe Nipple provides exceptional resistance to corrosive chemicals, including strong oxidizers and acids. Ideal for harsh environments in chemical processing and marine industries.
Additional Information:
The Titanium Grade 2 Concentric Reducer is a corrosion-resistant pipe fitting that smoothly connects pipes of different diameters along the same centerline. It offers excellent strength, durability, and superior resistance to oxidation in chemical, marine, and industrial environments.
Additional Information:
The Titanium Grade 5 Eccentric Reducer is a corrosion-resistant pipe fitting used to connect pipes of different diameters with an offset centerline. It provides high strength, durability, and excellent resistance to oxidation in aerospace, chemical, and marine industries.
Additional Information:
Duplex Steel S32205 Blind Flange provides robust corrosion resistance and strength, sealing pipe ends securely in high-pressure systems. Widely used in oil, gas, and chemical industries, it ensures safe isolation and long-lasting durability.
Additional Information:
Duplex Steel S32205 Socket Weld Flange delivers high strength and corrosion resistance, ideal for small-diameter, high-pressure pipelines. Commonly used in chemical, petrochemical, and offshore applications, it ensures secure, leak-free connections and long-term durability.
Additional Information:
The Duplex Steel S32205 Threadolet provides excellent strength and corrosion resistance, ideal for high-stress piping systems. Its threaded design ensures easy installation, making it perfect for oil, gas, and chemical processing applications.
Additional Information:
Super Duplex Steel S32760 Slip-on Flange offers excellent corrosion resistance, easy installation, and strong performance. Ideal for low to medium pressure applications in marine, chemical, and offshore industries, it ensures reliable, durable connections in harsh environments.
Additional Information:
The Titanium Grade 5 Slip-on Flange is a corrosion-resistant flange designed for easy installation by slipping over pipes. It offers strong, durable connections with excellent resistance to oxidation, ideal for aerospace, chemical, and marine industries.
Additional Information:
The Titanium Grade 5 Lap Joint Flange is a corrosion-resistant flange designed for easy pipe alignment and assembly. It offers high strength, durability, and excellent resistance to oxidation, ideal for chemical, marine, and aerospace industries.
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information:
Additional Information: